Saturday, April 19, 2014

How to Build a Computer?

There's a rush that you get when you press the power button for the first time on a new computer. The quiet whir of the fans, the reassuring beeps, and the glow of a monitor all signal the completion of another successful build. That feeling of unknown and anticipation is one of the driving forces for computer enthusiasts, and building your own computer is the perfect entry point. Everything from a simple office PC, to media centers, to high-end gaming rigs are all cheaper and more exciting to build for yourself. Follow this guide to learn how.

Part 1 of 8: Gathering Your Components

  1. Build a Computer Step 1.jpg
    1
    Determine the function of the computer. If you’re building a computer to use in the home office for word processing and emails, you’ll have much different requirements than if you’re building a computer for high-end gaming. The role of your computer will heavily dictate the components that you will need.
    • Don't waste money on expensive parts you may not need. If your PC will be performing only basic functions, you can save money by getting less powerful but more affordable components. Also you can save money by buying second hand products off ebay.
  2. 2
    Find the parts you need. Regardless of the final function of your computer, every computer needs the same basic components:
    • Processor – This is the brain of your computer. Almost all processors are multi-core, meaning they are essentially multiple processors in one. Compare specs and find a processor that has the speed that you will need to run the programs you want. Also take into account power usage and ease of cooling.
    • Motherboard – The motherboard is what connects all of the internal components of your computer. The processor you purchase will determine the type of motherboard you will need. Different processors have different “socket” sizes, and only work with motherboards that support that socket.
      • Motherboards come in two main form-factors: ATX and mATX. ATX is the standard full-size motherboard. If you are building a typical tower computer, look for ATX motherboards. mATX boards are smaller than the standard ATX board, and are better suited for portable systems and media PCs.
      • Make sure that your motherboard supports all of the other components that you wish to install. If you are planning on installing a high-end graphics card, the motherboard will need to support PCI-E. If you want to install lots of RAM, your motherboard will need to be able to hold at least 4 sticks.
    • RAM – RAM (Random Access Memory) is where programs store information that they are using. If you don’t have enough RAM, your programs will run much slower than they should. The RAM you can purchase is dictated by the motherboard that you choose. The speed of the RAM that you install must be supported by the motherboard.[1]
      • RAM should always be installed in matching pairs of sticks. All the RAM in the system should be the same speed, and preferably the same make and model. For example, if you want 8 GB of RAM, you can install two matching 4 GB sticks or four matching 2 GB sticks.
      • If you intend to use more than 4 GB of RAM, you will need to install a 64-bit operating system. 32-bit operating systems do not recognize more than 4 GB of RAM, even if more is installed.
    • Hard drive – Your hard drive stores all of your data and installed programs. Storage space has gotten much cheaper over the years, and it is easy to find up to a couple of terabytes of storage for just a little money.
      • Hard drives come in three basic flavors for desktops: 7200 RPM, 10000 RPM, or Solid State. Solid state drives are the fastest available, but the cost is significantly higher than a traditional drive.
      • Putting your operating system and critical programs on a smaller drive, and then storing everything else on a larger drive, will lead to faster loading times for your system.
    • Video card – A dedicated graphics card is essential for playing the latest games, but not a major issue for an office computer. Most modern motherboards have integrated graphics, so you don’t need a dedicated card if you’re planning to use the computer for web browsing and emails.
    • Case – This is what houses your computer components. The size of the case will be determined by how many drives you will be installing, as well as the size of your motherboard. Cases range from cheap and functional to flashy and expensive.[2]
      • If you intend to run a lot of high-end components, you will be dealing with a lot more heat output than slower components. Choose a case that promotes good airflow and allows you to install more fans.
    • Power supply - The power supply powers all of your components in your computer. Some cases come with a power supply already installed, but most require you to provide your own. The power supply should be powerful enough to charge all of your components, but not so powerful that you waste electricity by powering more than you need.
  3. Build a Computer Step 3.jpg
    3
    Research every component you intend to purchase. Read magazines and online consumer review sites for more information. Remember, this is one of the most important steps, because everything will depend on your hardware. There are many guides and reviews available from online magazines and consumer review websites. Samples include:
    • PC World
    • PC Magazine
    • Maximum PC
    • Custom PC

Part 2 of 8: Getting Started

  1. Build a Computer Step 4.jpg
    1
    Open the case. You might want to wear gloves or some sort of hand protection, as the inside of the case does not have grinded down metal and could be very sharp in some cases.
  2. Build a Computer Step 5.jpg
    2
    Install the power supply. Some cases come with the power supply already installed, while others will require you to purchase the power supply separately and install it yourself. Make sure that the power supply is installed in the correct orientation, and that nothing is blocking the power supply's fan.
    • Make sure that your power supply is powerful enough to handle all of your components. This is especially important in high-end gaming computers, as dedicated graphics cards can draw a significant amount of power.
  3. Build a Computer Step 6.jpg
    3
    Ground yourself. Use an antistatic wrist-strap cable to prevent Electrostatic Discharge (ESD) which can be deadly to computer electronics. If you can't get an antistatic wrist-strap cable, plug your grounded power supply unit to an outlet (but don't turn it on), and keep your hand on the grounded unit whenever you touch any ESD-sensitive items.

Part 3 of 8: Installing the Motherboard

  1. Build a Computer Step 9.jpg
    1
    Remove the motherboard from its packaging. Place it on top of its box. DO NOT place it on top of the anti-static bag as the outside is conductive. You will be adding components to the motherboard before installing it in the case, as it is easier to access the motherboard before installing it.
  2. Build a Computer Step 10.jpg
    2
    Remove the processor from its packaging. Observe the missing pins in the processor and match these with the socket on the motherboard. On many processors there will be a little gold arrow in the corner that you can use to orient the processor properly.
  3. Build a Computer Step 11.jpg
    3
    Insert the processor in the motherboard. Open the CPU socket and carefully insert the processor (no force needed). If it doesn't slip right in, or it feels like you have to push, it is probably misaligned. Close the socket and ensure the CPU is secure. Some sockets have small arms while others have complex assemblies to open and close the socket.[3]
  4. Build a Computer Step 12.jpg
    4
    Apply good thermal paste to the CPU. Use no more than a pea sized amount and spread it in a thin layer over the entire processor surface. Adding too much thermal paste will slow the transfer of heat, making it more difficult to cool the CPU quickly.
    • Some processors that come with heatsinks do not need thermal paste because the heat sink already has thermal paste applied by the factory. Check the bottom of the heatsink unit before applying paste to the processor.[4]
  5. Build a Computer Step 13.jpg
    5
    Attach the heat sink. This varies from heat sink to heat sink, so read the instructions. Most stock coolers attach directly over the processor and clip into the motherboard. Aftermarket heatsinks may have brackets that need to be attached underneath the motherboard. Refer to your heatsink’s documentation for exact instructions.
  6. 6
    Install the RAM. Place the RAM in the proper slots by opening the latches and pushing the RAM in until the little handles can lock it into position. Note how the RAM and slots are keyed--line them up so they will fit in properly. When pushing, press both sides of the RAM module with equal force. If RAM sockets have two colors, this may indicate the priority slots in case if you are not using all available slots.
    • Make sure that you install the RAM in the appropriate matching slots. Check your motherboard’s documentation to ensure that you are installing the RAM in the correct location.
  7. Build a Computer Step 14.jpg
    7
    Remove the I/O backplate from the case. Your motherboard should come with its own backplate. It is unlikely that your case will have an appropriate backplate for your motherboard.
    • Removing the existing backplate may take a bit of force. Sometimes they have screws to hold them in place, but most are held in only by friction. Pop it out by pressing on the bracket from the rear side of the case.
  8. Build a Computer Step 39.jpg
    8
    Knock out any tabs covering I/O components up on the motherboard's backplate. Push the new backplate into place in the back of the case. Make sure that install it the correct direction.[5]
  9. 9
    Install the standoffs in the correct positions. Almost all cases come with a little baggie that has standoffs in it. Standoffs raise the motherboard off of the case, and allow screws to be inserted into them.
    • Your case most likely has more holes available than your motherboard supports. The number of spacers required will be determined by the number of shielded holes in the motherboard. Position the motherboard to discover where to screw in the standoffs.
  10. Build a Computer Step 16.jpg
    10
    Secure the motherboard. Once the standoffs are installed, place the motherboard in the case and push it up against the I/O backplate. All of the back ports should fit into the holes in the I/O backplate. Use the screws provided to secure the motherboard to the standoffs through the shielded screw holes on the motherboard.
  11. Build a Computer Step 20.jpg
    11
    Plug in the case connectors. These tend to be located together on the motherboard near the front of the case. The order in which these are connected will depend on which is easiest. Make sure that you connect the USB ports, the Power and Reset switches, the LED power and hard drive lights, and the audio cable (HDAudio or AC97). Your motherboard’s documentation will show you where on your motherboard these connectors attach.
    • There is typically only one way that these connectors can attach to the motherboard. Don’t try to force anything to fit.

Part 4 of 8: Installing a Graphics Card

  1. Build a Computer Step 38.jpg
    1
    Remove the back panel covers that line up with the PCI-E slot. Almost all modern graphics cards use PCI-E. Some will require you to remove two of the protective plates as opposed to just one. You may have to punch the plates out of the case.
  2. 2
    Insert the graphics card. You may have to bend a tab on the slot to allow the graphics card to be inserted. The tab will help lock the graphics card in place (this is more important for bulkier, high-end cards). Apply light, even force until the card is seated uniformly, and the back panel lines up.
  3. 3
    Secure the card. Once you have inserted the card, use a screw to secure it to the back panel of the case. If you don’t secure your card, you could end up damaging it in the long run.
  4. 4
    Install any other PCI cards. If you have any other PCI cards that you are add, such as a dedicated sound card, the installation process is the same as the video card process.

Part 5 of 8: Adding the Drives

  1. 1
    Remove any front panel covers for the drives you are inserting. Most cases have panels in the front that protect the drive bays. Remove the panels for the locations that you want to install you optical drives. You do not need to remove any panels for hard drives.
  2. Build a Computer Step 22.jpg
    2
    Insert the optical drives in from the front of the case. Almost all cases have cages built in that allow the drive to rest and fit snugly. Once the drive is lined up with the front panel of the computer, secure it with screws on each side of the drive.
  3. 3
    Install the hard disk. Slide the hard drive into the appropriate 3.5” bay in the inside of the case. Some cases have removable brackets that you can install on the hard drive first before sliding it in. Once the drive has been inserted into the cage, secure it on both sides with screws.
  4. 4
    Connect the SATA cables. All modern drives use SATA cables to connect the drive to the motherboard. Connect the cable to the SATA port on the drive, and then connect the other end to a SATA port on the motherboard. Hard drives use the same cables as optical drives.[6]
    • For easier troubleshooting, connect your hard drive to the first SATA port on the motherboard, and then connect your other drives to subsequent SATA ports. Avoid plugging your drives into random SATA ports.
    • SATA cables have the same connector on both sides. You can install the cable in either direction.

Part 6 of 8: Wiring the Computer

  1. Build a Computer Step 36.jpg
    1
    Connect the power supply to the motherboard. Most modern motherboards have a 24-pin connector and a 6- or 8-pin connector. Both of these need to be connected for your motherboard to function. Power supply cables only fit into the slots that they are designed for. Push the connectors all the way in until the latch clicks.
    • The 24-pin connector is the largest connector on the power supply.
  2. 2
    Connect the power supply to the video card. If you have a dedicated video card, chances are it needs to be powered as well. Some require one connector, while others require two. The port is usually on the top of the video card.
  3. 3
    Connect the power supply to the drives. All of your drives need to be connected to the power supply using SATA power connectors. These power connectors are the same for optical and hard drives.
  4. 4
    Adjust your wire placement. One of the keys to good airflow is placing your wires out of the way. Trying to effectively wire the inside of the case can be a frustrating experience, especially if you are building a smaller tower. Use zip ties to bundle cables together and place them in unused drive bays. Make sure that the cables will not get in the way of any fans.

Part 7 of 8: Installing More Fans

  1. 1
    Connect your case fans. Almost all cases come installed with one or two fans. These fans need to be attached to the motherboard in order to function.
  2. Build a Computer Step 37.jpg
    2
    Install new fans. If you are running lots of high-end components, you will likely need extra cooling. 120mm fans are typically fairly quiet and significantly increase airflow through your computer.
  3. 3
    Optimize your fan setup. Front and top fans should be sucking air in, while side and rear fans should be pushing air out. This keeps a good flow of fresh, cool air moving over your motherboard. You can see which direction the fan will blow by inspecting the top of the fan housing. Almost all fans have small arrows printed which shows which direction the blow.

Part 8 of 8: Booting it Up

  1. 1
    Put the case back together. It is highly recommended that you don’t run your computer with the case open. Cases are designed to maximize air flow, and when a case is open the airflow is not as effective. Make sure that everything is screwed close. Most cases use thumbscrews so that you don’t need tools to open and close the case.
  2. 2
    Plug in your computer. Attach a monitor to the computer, either through the graphics card or through a port on the back of the motherboard plate. Attach a keyboard and mouse to the USB ports in either the front or back of the computer.
    • Avoid plugging in any other devices until after you have finished setting up the operating system.
  3. 3
    Power on your computer. You won’t be able to do much since you don’t have an operating system installed, but you can check to see that all of your fans are working and that the computer completes its POST (Power On Self Test) successfully.
  4. 4
    Run MemTest86+. This program is available to download for free and can be booted from a CD or USB drive without an operating system installed. This will let you test your memory sticks before you proceed to install the operating system. Memory sticks have a higher rate of failure than most computer components, especially if they are budget-priced, so it is wise to test them first.
    • You may have to set your computer to boot from CD or USB first, instead of booting from the hard drive. Enter your BIOS settings when you first start the computer, and then navigate to the Boot menu. Select the appropriate drive that you want to boot from.
  5. 5
    Install your operating system. Home-built computers can install either Microsoft Windows or a Linux distribution. Windows costs money, but benefits from having compatibility with nearly every program and piece of hardware. Linux is free and supported by a community of developers, but cannot run many programs designed for Windows. Some hardware does not work properly either.
  6. 6
    Install your drivers. Once your operating system is installed, you will need to install your drivers. Almost all of the hardware that you purchased should come with discs that contain the driver software needed for the hardware to work. Modern versions of Windows and Linux will install most drivers automatically when connected to the internet.

Tips

  • It may be very helpful to request the assistance of a friend who is familiar with building computers. At the very least, ask for their opinions on the parts you plan to use.
  • Use zip ties to carefully bundle all of the cables, and route them to prevent them from blocking the airflow. If possible, avoid using IDE components such as hard drives and optical drives, as the standard ribbon cable will block airflow.
  • Don't leave the hardware on your floor for days while you figure out what you should do, as this may lead to electrostatic discharge which can damage or ruin computer components(it only takes about 10 volts to kill some computer parts). When not attached to the motherboard and case, all components should be left in their anti-static bags. An alternative to this is placing the items on a non-conductive surface, such as a wood or glass table or desk.
  • If you put the computer system together and it does not work, take out everything except the power supply, motherboard, RAM, and processor cooler (and video card if not using an on-board video card). Ensure that it works by viewing your BIOS start up screen. Turn it off, then plug in your hard drives and verify that it works. Turn it off, then plug in your CD-ROM and ensure that it works. Turn it off, and continue to plug in each additional peripheral until everything is plugged in and working. The idea here is to put in the minimum components to get it to power up, then add one at a time so you know what component is causing the problem.
  • Each power supply cable will only fit in the correct orientation, but pressure will still be needed to push the cables in. If using a newer power supply with a 8-pin EPS 12V connector and a PCI Express 8-pin connector, don't attempt to force the cables into place.
  • Some power supplies have a built in 115/230V converter. If you are in the U.S. use the 115V setting, otherwise use the 230V.
  • If you bought an original equipment manufacturer (OEM) edition of Microsoft Windows and you have a license sticker, you may want to attach the sticker on the side of the PC for future reference when Windows Setup asks for it.

Warnings

  • Don't touch the resistors on the CPU or the socket.
  • Double-check all connections before switching on the computer for the first time. Although in most instances it shall only be possible to mount a fabricated connector in one possible orientation, some are rather delicate and with a relatively small amount of force applied to them can, indeed, be inserted offset by 180 degrees. This is especially true with access memory (random) dual inline memory modules (DIMMs), as they can some times appear to the system builder, that they have been inserted in the correct orientation - but have, indeed, been inserted incorrectly. Such application of a memory module to a DIMM slot will result in a short-circuit of the System memory, rendering the ram PCB broken and unable to be used. This can be avoided by paying rather strict attention to the so-called line up notches that are present on modern RAM DIMM modules, making it increasingly apparent to the computer System builder that he/she has positioned the system Memory in an incorrect fashion.
  • Do not use force to insert any component into any slot or socket. The tolerances of newer hardware components may be narrow, but everything should still fit without the need to apply too much force. Memory modules are among the few types of components that may require a bit of pressure to install. Before installing your memory modules, make sure they match the memory slots by comparing the notches.
  • Do not force cable connections. Fortunately, cables at the back of a computer will only fit onto their intended connector. All cables, except for coaxial and some laptop power connections, will only connect when they are in the same orientation as their connector. For example, digital visual interface (DVI) and video graphics array (VGA) video cables have a trapezoidal connector, not a rectangular one.
  • If you are unsure about any aspect of the construction of your computer, do not try "winging" it. Either ask someone who knows what they're doing to "spot" you while you build or hire a professional to do it for you. Another alternative is to seek advice from the included instructional manuals that are packaged with the individual pieces of computer hardware that you are assembling. Often, if these have not been included - or perhaps the parts you are using to construct your computer system are of a second hand nature - you may be able to consult the System Support section of the website page of the manufacturer to attempt to acquire the necessary instructional documentation.
  • Avoid electrostatic discharge when installing components. Wear a static wristband or regularly ground yourself by touching a metal part of the case before handling components. Read the Related wikiHow on How to Ground Yourself to Avoid Destroying a Computer with Electrostatic Discharge for additional information.
  • Maintain a circuit connection to electrical ground when building the computer. This can, indeed, be achieved by plugging the computer powered supply unit (PSU) into an available mains-power outlet by means of a cable of the recommended amperage rating. This cable shall, indeed, usually be a kettle type chord that was provided with your computer initially. Ensure that the available mains-power outlet has been switched off. This is to ensure that the various electronic parts inside the computer that you are connecting together as you progress with your PC build are not, indeed, live. With the mains-power outlet in the off position, indeed, the ground connection is still maintained. It is only the other two live terminals that have their circuits broken, so no power is transmitted to the said device. Indeed, this is a safety measure built in to all mains-power outlet circuit switches.
  • Use care when working around the sharp, sheet metal edges of a computer case. It is easy to cut yourself, especially with very small cases.
  • When plugging in CPUs and PATA (IDE) devices, be gentle. If you bend a pin, use tweezers or a narrow needle-nose pliers to straighten it. If you break a pin, on a CPU or CPU socket, your hardware will no longer function correctly. If you break a pin on an IDE connector, you have a 7 in 40 chance that you've broken a ground pin, which may not be critical to a device's functionality.
 Reference:
http://www.wikihow.com

Sources and Citations

0 comments:

Post a Comment